BACKORDERED, END OF JANUARY
The best coolant filter in the industry just got better. The CF2 includes 3 position integrated ball valves that can bypass the coolant filter in an event the coolant filter element becomes clogged, turn it to the off position to stop coolant flow when servicing the element or the "on" position to filter your coolant with the highest efficency filter in the industry
This filter is the only one the in the market that can be used as a full flow filter, this will allow you to install it inline on the heater hose and filter 100% of the coolant that runs through the heater hose which is much more effective in contamination filtration than anything out in the market. IPR's High Flow Coolant Filter is fully serviceable, the filter can be fully dissassembled and washed with any conventional degreaser or bathroom cleaners such as CLR or Limeaway. The filter element is stainless steel and features magnet in the bottom center of the element. The magnet attracts metallic particles such as corroded cast iron from your engine block that has separated. The magnetic design was implemented to extend filter service intervals, it allows the filter element to trap sand and non metallic particles while most of the metallic particles stay on the bottom of the filter element bonded on the magnet. IPR's High Flow Coolant Filter is much more effective because IPR uses 3/4" hoses. Other coolant filter bypass kits is minimally effective using only small 1/4 or 3/8 heater hose. Most of these other bypass filtration kits on the market uses a Baldwin filter with a 1/8 orifice. IPR's High Flow Coolant Filtration out flows anything in the market by 83%!!!
Check out these pictures on powerstroke.org of actual customer's filtering results
|
Ford OEM Update Parts
