Home * Ford Diesel 6.4 * Engine * IPR External Oil Cooler Kit for Ford 6.4 Powerstroke

IPR External Oil Cooler Kit for Ford 6.4 Powerstroke

IPR External Oil Cooler Kit for Ford 6.4 Powerstroke
Oil cooler mounted on master cylinder driver side Oil cooler mounted on master cylinder driver side Coolant filter mounted under driver's floor board High flow coolant filter traps contaminants and oil Sand and rust particles

IPR External Oil Cooler Kit for Ford 6.0 PowerstroIPIPR'sIPR is the first and only manufacturer to develop a water cooled external oil cooler kit for the 6.4 Powerstroke that bypasses the internal OEM cooler. IPR's external oil cooler kit is now available! The benefits of using this kit will allow the coolant to be filtered at 100% duty cycle with our high flow coolant filter which features a serviceable stainless steel filter element. The coolant filter included in this kit is not a bypass filter like most other "coolant filter kits" on the market where they are designed as a bypass filtration that filters only 10-15% of the coolant. IPR's coolant filter is designed to completely filter out all contaminates. The additional benefits of an externally mounted oil cooler is that the oil cooler is allowed to work more efficiently. The OEM internally mounted design inhibits more heat when mounted inside the engine block.

IPR's external mount design will save you thousands of dollars in labor if a oil cooler is to ever fail again by allowing the technician to replace oil coolers in less than 20 minutes. An average labor cost to replace a OEM oil cooler can cost upwards of $1500-2500 plus the cost of an new oil cooler $350. This kit will pay for itself if you have 1 oil cooler failure. This kit retails for $1699, includes a new OEM oil cooler. You can save $240 by purchasing the external kit without the new OEM oil cooler, this enables the customer to reuse their existing oil cooler.
 

Requires only 2 hr of additional labor over an normal OEM oil cooler repair job

Eliminates the OEM oil cooler internally and relocates it to under the driver side master cylinder

Oil filter is used inside the factory oil filer housing, no remote oil filter/housing/plumbing required

100% Duty cycle coolant filtration, not a bypass. Coolant filter is stainless steel and serviceable 

Most of the OEM components such as oil cooler housing, oil filter housing and all OEM flow paths are unaltered

Requires only 1hr to replace an oil cooler if necessary

Upgrade and Options
 
 
Stainless Steel Braided Hose
Stainless steel braided hose is much more durable than our standard hydraulic hose. The stainless steel hose's upgrade features AN fittings that can be disassembled and reused. This is a great option if you want to make custom lengths for your application by simply purchasing longer hoses. Stainless steel braided hose also makes your engine bay stand out and give it the custom look!
 
 
Extra Filters
IPR makes servicing your oil filter easy. Filter kits include 3 orings proprietory to IPR's External Oil Cooler kit. Save on shipping fees by ordering extra filter.
Filters can also be purchased through your local auto parts store however the 3 orings required will not be included.
 

See youtube video on IPR External Oil Cooler Temp Spread

See youtube video on IPR External Oil Cooler Temp Spread Towing

 

Benefits and FAQ regarding IPR's External Oil Cooler Kit

IPR solved 2 major problems with the Ford 6.4 oil cooler failure issues. First, by removing the internally mounted OEM oil cooler and relocating it to the driver side under the master cylinder we are able to reduce the amount of time/labor it would normally take to service the oil cooler. You can swap out a brand new oil cooler in as little as 1hr should you need to replace it for any reason. Second, by mounting the OEM oil cooler externally we were able to filter the coolant 100% before any coolant ever enters the oil cooler.

Q. What happens to the OEM oil cooler that was mounted inside the engine?

A. The OEM oil cooler is replaced by IPR's patent pending bypass manifold. The bypass manifold is a bolt in replacement that has 3/4" passages that allow the coolant and oil to continue it's OEM design pathways and is then routed out to IPR's billet aluminum oil filter cap, out to the oil cooler and back into supply.

Q. Where is the oil filter located?

A. The oil filter is located in the factory oil filter housing just like the OEM oil filter.

Q. Where can I buy oil filter if I need to service my truck?

A. Oil filters can be purchased from IPR through our website or you can purchase them at any NAPA auto parts or local auto parts store. They are over the counter common filters manufactured by WIX.

Q. Do I have to remove the oil hoses off the filter cap everytime I change my oil filter? Seems like a hassle.

A. The 2 oil hoses do need to be removed to replace the oil filter, however it's a small inconvenience, in most cases you can loosen the 2 oil hoses in less than 1 minute.

Q. Why do I have to purchase the IPR External Oil Cooler Kit when I can just install a coolant filter in my truck with a OEM oil cooler mounted internally inside the engine.

A. Unfortunately the design of the OEM internally mounted oil coolers gets clogged up by contaminants such chemical breakdown, cast iron corrosion fallout and casting sand from engine maufacturing and the coolant supply for the OEM oil cooler is fed directly from the engine block into the oil cooler. There is no way to intercept the coolant "before" it enters the OEM internally mounted oil cooler. All aftermarket coolant filters only filter coolant after contaminants have passed through your OEM oil cooler.

Q. The External Oil Cooler Kit is expensive it's out of my budget.

A. Considering a new OEM internally mounted oil cooler cost about $350-$410, intake gasket kit $90 and labor to remove/install a new oil cooler can cost from $1500-$2500. The next time you need to replace your clogged oil cooler the kit will pay for iteself and more.

Q. Why do I have to purchase the IPR External Oil Cooler Kit when I can just install a coolant filter in my truck with a OEM oil cooler mounted internally inside the engine and flush out the coolant system?

A. Unfortunately the design of the OEM internally mounted oil coolers gets clogged up by contaminants such chemical breakdown, cast iron corrosion fallout and casting sand from engine maufacturing and the coolant supply for the OEM oil cooler is fed directly from the engine block into the oil cooler. There is no way to intercept the coolant "before" it enters the OEM internally mounted oil cooler. All aftermarket coolant filters only filter coolant after contaminants have passed through your OEM oil cooler. In cases where a OEM oil cooler has ruptured where coolant and oil has mixed into the coolant system it is extremely difficult to flush out all the oil residue, unfortunately a new OEM oil cooler must be installed in order to flush out the mess, this will lead to contamination of the brand new oil cooler that was just installed.

Q. I see that IPR offers a High Flow Coolant Filter, is this filter included in the kit?

A. The 6.4 External oil cooler kit includes IPR's infamous High Flow Coolant Filter

Q. What is the advantage of IPR External Oil Cooler Kit in comparison with a air cooled type kit mounted in front of the truck?

A. There are many reasons why a water cooled system is much more effective. We will go into detail on this subject.

Q. Will I have to purchase any other components to make this kit work in different climates?

A. No additional components will need to be purchased. Other aftermarket kits in the market require you to purchase a thermostat kit that can cost up to $350 for cold climate use and a possibilty that you'll need to replace your transmission cooler due to fitment issues that you may experience based on the build date and equipment on your truck. IPR require no additional parts to make the oil cooler kit operate properly.

1. Air cooled oil cooler cores require a substantial amount of space in front of a vehicle for it to work efficiently. In most cases an air cooled oil cooler will restrict air flow to your radiator, AC condensor and radiator. Some manufacturers recommend that their oil cooler cores be mounted behind the AC condenser. The large air cooled oil cooler restricts enough air flow to the condensor that it will  diminish AC performance as well as radiator and intercooler performance. Mounting the air cooler behind the AC condensor also requires the use of additional bracketry, hardware, drilling , disassembling the front end of the vehicle, relocating the transmission cooler, purchasing and relocating the power steering cooler, discharge AC, and recharge AC upon installation which will require an additional 4-8 extra labor cost which can cost well over $1000.

2. Air cooled oil coolers require air flow (increased vehicle speed) and outside air temperature to operate efficiently. In an extreme condition when a vehicle towing a heavy load up a grade on a hot day, the vehicle speed is limited due to the icreased load from towing and climbing resulting in less air flow and hotter outside air temps. The problem is exaggerated when a heavy duty fan clutch is installed which will cause parasitic power loss and increased load on the engine also resulting in decreased fuel economy.

Water cooled oil coolers rely on the OEM radiator as a heat exchanger to cool the oil down. The radiator used in the front of the vehicle is the largest heat exchanger on the vehicle which is very efficient. IPR External Oil Cooler Kits require no additional fans or components.

3. Cold weather performance with water cooled oil cooler is also more efficient during warm up. The same coolant used to cool the oil down in hot weather is also used to heat the engine oil up to normal operating temperatures much more effectively and more consistently. The OEM thermostat will remain closed to aid the coolant in reaching normal operating temps much sooner than an air cooler. During cold climates an air cooler will constantly cool oil temps as it’s trying to warm up. Some manufacturers would recommend a thermostat kit which can cost an extra $350 and more plumbing/fittings and labor to install.

4. Water cooled is the future! The new Powerstroke 6.7 utilizes coolant to control excessive temps on the transmission, oil cooler and intercooler.


 
SKU EOC-640810  
Weight 35.00 lbs
With new OEM oil cooler
Stainless Steel Braided Hose Upgrade
High Flow Coolant Filter
Purchase Extra Filters
 
Our price: $1499.00
12%
Market Price: $1699.00
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
Ford OEM Oil Cooler Kit for 08-10 6.4 Powerstroke F250, F350, F450, F550
ARP Head Studs & Ford OEM Head Gasket Set 20mm w/Bottom End Set
ARP Head Studs Ford 6.4 F250, F350, F450, F550 Powerstroke
Ford OEM Oil Cooler Kit for 08-10 6.4 Powerstroke F250, F350, F450, F550 ARP Head Studs & Ford OEM Head Gasket Set 20mm w/Bottom End Set ARP Head Studs Ford 6.4 F250, F350, F450, F550 Powerstroke
$300.00
$1379.99
$529.00
 
FORD PCM Roll Back EGR Delete Reflash F250, F350, F450, F550 Powerstroke 6.0
IPR External Oil Cooler Cap Assembly V2
Edge  EGT Accessory for CS and CTS (non-expandable)
FORD PCM Roll Back EGR Delete Reflash F250, F350, F450, F550 Powerstroke 6.0 IPR External Oil Cooler Cap Assembly V2 Edge EGT Accessory for CS and CTS (non-expandable)
$175.00
$199.00
$104.14
 
Edge Insight CTS
Garrett Powermax Turbo Charger w/VGT Solenoid Late 2003 F250, F350, F450, F550 Powerstroke 6.0 International VT365
IPR GEN3 EGR Delete Kit, Includes Intake Gasket Kit for all 2005-2007 Ford Powerstroke 6.0 will fit F250, F350, F450
Edge Insight CTS Garrett Powermax Turbo Charger w/VGT Solenoid Late 2003 F250, F350, F450, F550 Powerstroke 6.0 International VT365 IPR GEN3 EGR Delete Kit, Includes Intake Gasket Kit for all 2005-2007 Ford Powerstroke 6.0 will fit F250, F350, F450
$419.69
$1300.00
$348.99

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.