IPR has put together a master head gasket set to get back on the road fast. We have included everything to make it easy for you to finish the job without trying to figure what you need. Ford sells 2 head gaskets, 2 stand pipes with head bolts that you end up throwing away, Ford priced at over $550. You will still need to purchase quite few more gasket to make a complete kit, by the time you're done with getting a package similar to IPR's package you would have to spend over $800 in gaskets. This kit allows you to save some money and get the complete head set to rebuild both heads with ARP studs. No other vendor's 6.0 gasket kit is as complete as mine, please check the itemized seals, gaskets and o-rings listed. Other sellers claim that they supply everything to do the job which is short on components. We will match any advertise price and will not be undersold!
Tech tip. When rebuilding 6.0 heads we recommend that you have your heads resurfaced and Magnaflux for cracks. 6.0 heads are notorious for cracks around the valve seat area which may be causing your truck to lose coolant and over heat which may seem like blown head gaskets have failed. My kit includes 32 valve stem seals valued over $120 to have your heads rebuilt. You pay thousands of dollars for labor don't put in the old heads without a rebuild, you may have to do it again down the road in the near future.
1. ARP Head Studs
2. Head Gaskets 2 required
3. Rocker box gaskets 2 required
4. Valve cover gaskets 2 required
5. Valve cover grommets 20 required (10 per head)
6. Valve stem seals 32 required
7. Injector O-ring Kit 8 sets required
8. Intake manifold gasket set and throttle body o-rings
9. EGR Cooler/Valve Gaskets O-rings
10. Exhaust manifold gaskets 2 required
11. All buna n o-rings/copper o-rings for your fuel lines
12. High Pressure Oil Pump Housing Gaskets
13. Oil Filter housing O-rings
14. Fuel Filter Housing O-rings
15. Oil Cooler Housing Gasket
16. Stand Pipe O-rings (rebuild your old stand pipes) Ford sells these for over $45 per side!
17. O-rings for all your sensors
This kit basically comes with every seal, o-ring and gasket from the heads up.
We also recommend Ford's revised parts and updates while you have your truck apart whenever you install a oil cooler, EGR cooler, EGR delete or any time you may be removing the intake manifold and turbo off for repairs. These updates are easily accessible when performing any of the mentioned upgrades or repairs on your 6.0. Don't wait until these components fail and having to perform the job a second time.
Click Here Ford Update Parts
|
